Catskill-craftsmen 1526 Manual do Utilizador

CRAFTSMEN, INC.Assembly Instructions Model 1526Microwave Space Saver Cart With DrawerGENERAL: 1. You have purchased model 1526. Overall dimensions of

STEP 9Attach handle/towel bar to side panel with 1 1/4” #8 screws from inside side 1 1/4” Phillips Flat Head #8 Screw (12) 2 Used in this stepSTEP 10A

STEP 12A. Stick magnet to magnet plate on right door.B. With left door open, close the right door. The magnet should be positioned over the wooden blo

STEP 13A. Insert and tap caster sockets with hammer until the teeth grab the wood. DON’T POUND SOCKET FLAT OR CASTER SHAFT WILL NOT ENTER.B. Insert ca

For continued beauty and long life of your Catskill Craftsmen cart, we recommend Catskill Craftsmen’s Butcher Block Oil. If you would like to purch

Plain Side Panel (1) TOPHandle Side Panel (1) TOP TOPBack Panel (1) Not Used Drawer Bottom (1) Drawer Dowel (1) Drawer Front (1) Drawer Back (1) 13 3/

1 3/4” Phillips Flat Head Machine Screw (8) Cam Posts (2) 1 1/4” Phillips Flat Head #8 Screw (14) 1” Truss Head Machine Screw (6) 5/8” Pan Head Screw

1 1/4” Phillips Flat Head #8 Screw (22) 8 Used in this stepSTEP A 1. Attach the Rack Top to the top ends of the Side Panels using 1 1/4” #8 wood screw

1 1/4” Phillips Flat Head #8 Screw (12) 4 Used in this step Attach a table top stick to the top of each side panel using 1 1/4” #8screws. The counter

STEP 4A. Turn the side/back assembly ( from step 2 ) upside down ( invert ) on top of the inverted table top.B. Drop two 1 1/4” # 8 screws into the ho

STEP 5A. Attach the drawer back to the drawer sides with four 1 1/4” #8 screws. Make sure parts are aligned as in illustration 5A.B. Insert drawer bot

STEP 6 Take drawer, insert the drawer dowel thru the hole in the drawer back, invert drawer and place in cabinet cavity. Insert/turn drawer dowel int

STEP 8A. Take the top front brace ( with magnet block ), insert the pins in the brace ends into the slots on the inside of the front legs and slide do